Mutek homeBackAbout MutekSend MailSite MapView CartCheckout 
 
 Quick search   

 

 


Network cable tester with remote moduleNetwork cable tester with remote module

This network cable tester has connectors for RJ-45 (10 Base-T) and RJ11/12 cables.
Easily verify cable continuity, opens, shorts and crossed pairs.
Used with the remote module it can test an installed cable up to 1000 ft long.
9 LEDs to indicate opens / connects on both the remote and master unit.
Auto scanning mode for rapid testing.
Ground shield test.
Power switch.

Included:-

Master and Remote units.
Protective carrying case.
User Manual.
 


Price:   £35.00 (Excluding: VAT at 17.5%)
Pack of 10 RJ45 plugs
Use these RJ45 connectors along with stranded Cat5e cable and crimp tool to easily make your own network patch cables.

Specifications Type: RJ45 Plugs (Headers)
Colour: Grey/Clear
Connectors: RJ45



 


Price:   £1.25 (Excluding: VAT at 17.5%)
 Pack of 10 RJ45 plugs
RJ45 cable boots - 5 packRJ45 cable boots - 5 pack
Strain relief boot for use with RJ45 connectors on network patch cables. 


Price:   £0.95 (Excluding: VAT at 17.5%)
TrendNet RJ11/RJ45 Hand Crimp/Cut/Strip Tool
This professional crimp tool crimps, strips, and cuts cable for 8 and 6 position modular plugs. It delivers good performance at a very reasonable price.

Suitable for RJ45 (10BaseT & 100BaseT ethernet), and RJ11 connectors commonly used for broadband ADSL cables.
 


Price:   £19.95 (Excluding: VAT at 17.5%)
 TrendNet RJ11/RJ45 Hand Crimp/Cut/Strip Tool
RJ45 back-to-back coupler extends/joins network cablesRJ45 back-to-back coupler extends/joins network cables

Connect two RJ45 cables together with this straight through coupler -

Extend network cables.
Join two network cables together.


 


Price:   £1.75 (Excluding: VAT at 17.5%)
Modular wiring tester for network cabling

This tester will find shorts, opens, miswires and crossed pairs in network cables terminated with RJ45 connectors (Cat5, Cat5e, etc 10/100Base-T). Using the detatchable remote module installed cables can also be tested.

Features -

- Cable test results displayed on the main unit and the remote unit in less that 2 secs after plugging in.
- Auto power on/off - just plug the cable ends into the tester.
- Tone generator mode for use with tone tracers.
- Debug mode with from/to and failures for each pair.
- Battery low indicator
- Snap together case and pouch. 


Price:   £59.00 (Excluding: VAT at 17.5%)
 Modular wiring tester for network cabling


Sales - 0845 330 1241